DISCONTINUED - NO LONGER AVAILABLE
A first in aviation communications! Vertex Standard has combined over 40 years experience in amateur radio communications and our expertise in aviation communications to make the world's first Air Band, VOR Navigation and Amateur Radio 2 meter and held transceiver!
*Valid Amateur Radio License Required for Operation on Amateur Radio Frequencies
DISCONTINUED - NO LONGER AVAILABLE
A first in aviation communications! Vertex Standard has combined over 40 years experience in amateur radio communications and our expertise in aviation communications to make the world's first Air Band, VOR Navigation and Amateur Radio 2 meter and held transceiver!
*Valid Amateur Radio License Required for Operation on Amateur Radio Frequencies
Antennas & Adapters | ||
CN-3 | SMA to BNC Adaptor | |
Batteries | ||
FNB-80LI | FNB-80LI 1250mAh Lithium Ion Battery | |
Battery Chargers | ||
CD-15A | Desk Top Rapid Rate Charger for Lithium-Ion Battery, to be used w/NC-72B/C or w/PA-48B/C | |
E-DC-6 | DC Cable; plug and wire only | |
NC-72B | 120 VAC 12-Hour Wall Charger | |
NC-72C | 220 VAC Rapid Charger/Power Cable | |
Belt Clips | Cases | ||
CSC-88 | Soft Case | |
Chargers | ||
CD-15A | Desk Top Rapid Rate Charger for Lithium-Ion Battery, to be used w/NC-72B/C or w/PA-48B/C | |
CD-15A | Desk Top Rapid Rate Charger for Lithium-Ion Battery, to be used w/NC-72B/C or w/PA-48B/C | |
E-DC-6 | DC Cable; plug and wire only | |
NC-72B | 120 VAC 12-Hour Wall Charger | |
NC-72B | 120 VAC 12-Hour Wall Charger | |
NC-72C | 220 VAC Rapid Charger/Power Cable | |
Chargers - DC | Vehicular | ||
E-DC-6 | DC Cable; plug and wire only | |
PC Programming | ||
USB-57B USB Programming Cable | USB-57B USB Programming Cable | |
Programming Cables | ||
CT-29 | PC to adaptor programming cable. Requires CT-97 (adaptor to radio). | |
CT-97 | Programming cable adaptor. Requires CT-29. | |
USB-57B USB Programming Cable | USB-57B USB Programming Cable | |
Speaker Microphones | ||
MH-44B4B | LT Duty Speaker Microphone for the VXA-220, 300, 710 Models |
You can reprogram the home channel as follows: 1. Press the [SEL] key until you enter the VFO mode. 2. Tune the VFO to the desired frequency, tone, split, etc. as needed. 3. Press and hold in the [MW] key for 2 seconds; the radio will enter the Memory Write mode. 4. Press and hold in the [121.5/Home] key for 2 seconds. 5. The VFO frequency and additional information will now have been stored in the HOME memory position.